CY14NVSRAMKIT-001 nvSRAM Development Kit User Guide, Doc. # 002-03522 Rev. *A
21
Kit Operation
Figure 4-2. FM4 MCU Evaluation Board Setup in Programming Mode
Note:
LED5 (Green) indicates the board is powered from the USB port via the CN3 connector.
LED3 (Red) indicates the board is powered in the Programming (and Debugging) mode.
CY14NVSRAMKIT-001 connection to the FM4 MCU Evaluation Board is not necessary during
programming.
8. Run the Flash MCU Programmer:
Start
>
All Programs
>
FLASH MCU Programmer
>
FM3
.
Alternatively, you can execute "flash.exe" at the following locations:
Windows 7 (64-bit):
C:\Program Files (x86)\Spansion\FLASH MCU Programmer\FM3
Windows 7 (32-bit):
C:\Program Files\Spansion\FLASH MCU Programmer\FM3
Figure 4-3. Flash MCU Programmer
a. Select Target MCU:
MB9BF568M/N/R
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from