CY14NVSRAMKIT-001 nvSRAM Development Kit User Guide, Doc. # 002-03522 Rev. *A
30
Kit Operation
Figure 4-18. Verify Spansion Virtual Communication Port
4.4
Development Kit Setup
After configuring the FM4 MCU Evaluation Board in Run mode, connect the nvSRAM DVK with the
FM4 MCU Evaluation Board, as shown in
Figure 4-19
to run the software.
Software details are provided in the
Kit Software chapter on page 32
.
CAUTION:
Remove the USB connection to power off the FM4 MCU Evaluation Board before plugging on the
CY14NVSRAMKIT-001 board.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from