manualshive.com logo in svg

CYP EL-8300VA, Operation Manual, Page: 58 / 98

Share
Download
CYP EL-8300VA Operation Manual Download Page 58

52

COMMAND

Description and Parameters

get in 8 phase

Show the current PC phase value for the VGA input.

set in 8 clock N1

Set the PC clock value for the VGA input.

N1

 = 0~250   

 

[PC clock]

get in 8 clock

Show the current PC clock value for the VGA input.

set in 8 hposition N1

Set the PC horizontal position for the VGA input.

N1

 = 0~250   

 

[Horizontal position]

get in 8 hposition

Show the current PC horizontal position for the VGA input.

set in 8 vposition N1

Set the PC vertical position for the VGA input.

N1

 = 0~250   

 

[Horizontal position]

get in 8 vposition

Show the current PC vertical position for the VGA input.

set out A video mode N1

Enable or disable the video output bypass mode.
Available values for 

N1

: 

0 

   [Video 

bypass 

disabled] 

1 

   [Video 

bypass 

enabled]

get out A video mode

Show the current video output bypass mode state.

Summary of Contents for EL-8300VA



































































































Reviews:

No comments