CYP EL-8300VA, Operation Manual, Page: 25 / 98

19
mode and bitstream audio can be supported.
Note: This bypass setting affects audio only.
2) Audio Routing: Select the audio routing behavior of the unit.
„
Follow User:
Audio routing will follow the selections made in the
“Follow User Setting” section.
„
Follow Video: All digital sources will use their native embedded
audio content. The VGA source will use the Analogue 1 audio input.
„
Fixed Analogue 1~6:
Forces all video sources to be paired with the
selected analogue audio source.
Note: When HDMI Out Bypass for audio is enabled, all audio will
automatically behave as if in “Follow Video” mode.
3) Follow User Setting: Options for defining the audio routing to use
when the “Follow User” mode is enabled. Select the preferred Follow
User source for each input.
4) Output Mixer: Set the microphone mixing mode of the unit.
„
Mixer Off: Disable the audio mixer.
„
Mixer On:
Enable the audio mixer. Audio from the current source
and the microphone will be mixed together.
„
MIC Only: Output only the microphone audio source. This mode
will override all other audio selections.
Note: Activating Mixer On mode, or MIC Only mode will automatically
disable HDMI Out Bypass mode.
5) Mic Gain: Sets the microphone input’s volume level when the
microphone is an active audio source (mixed or unmixed).
6) HDMI/Analogue/Speaker Out Volume: Set the volume level for each
audio output type.
Note: LPCM 2.0 sources only. Not active when HDMI audio Out Bypass is
enabled.
7) HDMI/Analogue/Speaker Out Mute:
Enable or disable muting the
audio of each output type.
8) Audio Delay:
Set the amount of time (in milliseconds) to the delay the
audio output if audio and video seem to be out of sync.
Note: LPCM 2.0 sources only. Not active when HDMI audio Out Bypass is
enabled.