CYP EL-8300VA, Operation Manual, Page: 37 / 98

31
„
Output Freeze:
Enable or disable freezing the video output.
Note: Not available when HDMI bypass mode is enabled.
„
Output Auto Sync Off:
Sets the amount of time to continue
outputting sync with the free run colour if there is no live source
and no operations have been executed on the unit. Setting this to
“OFF” forces the unit to always output sync.
„
Output Auto Route:
Enable or disable automatically switching to
any newly detected source.
6.6.2 HDCP Tab
Provides control over the HDCP behavior of each input. To configure the
HDCP support on one or more inputs, select the preferred inputs on the
left, and then select the HDCP mode on the right. The change will occur
immediately.
Note: The VGA inputs are not listed as they cannot support HDCP.
1) HDCP Mode:
„
Support Off: Completely disables support for HDCP on that input.
„
Refer to Source:
Makes the input port support the same HDCP
version as required by the connected source.
„
Refer to Display: Makes the input support the HDCP version of the
currently connected displays.