CYP EL-8300VA, Operation Manual, Page: 36 / 98

30
3) Additional Settings:
„
HDMI Out Bypass: Enable or disable the video output bypass
mode. When bypass is enabled, HDR video and bitstream audio can
be supported, however it will disable the unit’s scaling and video
adjustment functions.
Note: This setting affects both the HDMI and HDBaseT outputs. This
setting does not enable audio bypass.
„
Output Resolution:
Selects the output resolution to use when
HDMI bypass is disabled. Selecting a “Native” resolution option will
make the unit automatically select an output resolution based on
the detected EDID of the connected display.
Note: Not active when HDMI bypass mode is enabled.
„
Output Aspect:
Selects the aspect ratio to use when outputting
the source. “Full” stretches the source to fill the output resolution,
regardless of the original aspect ratio, while “Best Fit” will always
attempt to retain the original source’s correct aspect ratio by adding
black bars if necessary. “Follow In” centers the source on the screen,
without any scaling (1:1 pixel reproduction).
Note: Not active when HDMI bypass mode is enabled.
„
Output No Signal Colour:
Use the dropdown to select the colour
to display when there is no signal.
Note: Not active when HDMI bypass mode is enabled.
„
Output Blank:
Enable or disable blanking the video output.
Note: Not available when HDMI bypass mode is enabled.
„
Output Freeze:
Enable or disable freezing the video output.
Note: Not available when HDMI bypass mode is enabled.
„
Output Auto Sync Off:
Sets the amount of time to continue
outputting sync with the free run colour if there is no live source
and no operations have been executed on the unit. Setting this to
“OFF” forces the unit to always output sync.
„
Output Auto Route:
Enable or disable automatically switching to
any newly detected source.
Note: Not active when HDMI bypass mode is enabled.
„
Output Blank:
Enable or disable blanking the video output.
Note: Not available when HDMI bypass mode is enabled.
„