CYP EL-8300VA, Operation Manual, Page: 44 / 98

38
change. An EDID Upload window will appear, allowing you to locate
and upload the preferred EDID file (*.bin format) from a local PC.
Once the correct file has been selected, please click the “Upload”
button in the window, and the file will be transferred to the unit.
„
2) Sink EDID Download: To save the EDID from one of the
connected displays to your local PC, select the appropriate
sink from the dropdown list then press the “Download” button.
Depending on your browser settings you will either be asked where
to save the downloaded file, or the file will be transferred directly to
the default download location on your PC.
„
3) Set EDID Input Content:
This section provides controls for
assigning EDID to the unit’s inputs. Click on the preferred input(s)
on the left and then select the EDID on the right and the change
will occur immediately. Multiple inputs can be selected at once, if
desired.
Note: In most cases, assigning a new EDID to an input will cause the
affected input to briefly blink out while the source adapts to the new
information.
This unit provides the following 7 default EDIDs:
Unit’s Default EDIDs
Default FHD 2CH 1920×1080p@60Hz (4.95Gbps) & 8-bit colour, LPCM 2.0
Default FHD MCH 1920×1080p@60Hz (4.95Gbps) & 8-bit colour, LPCM 7.1
& Bitstream
Default UHD 2CH
3840×2160p@30Hz (10.2Gbps) & Deep Colour
(8/10/12-bit), LPCM 2.0
Default UHD MCH 3840×2160p@30Hz (10.2Gbps) & Deep Colour
(8/10/12-bit), LPCM 7.1 & Bitstream
Default UHD+ 2CH
3840×2160p@60Hz (18Gbps) & Deep Colour (8/10/12-
bit), LPCM 2.0
Default UHD+ MCH 3840×2160p@60Hz (18Gbps) & Deep Colour (8/10/12-
bit), LPCM 7.1 & Bitstream
Default VGA
1920×1080p@60Hz (148MHz) & 8-bit colour
Note: In some rare cases it is possible for custom or external EDIDs to
cause compatibility issues with certain sources. If this happens, it is
recommended to switch to one of the 7 default EDIDs for maximum
compatibility.