CYP EL-8300VA, Operation Manual, Page: 40 / 98

34
6.6.4 Audio Tab
This tab provides control over how audio is routed within the unit as
well as control over audio mixing, individual output volume and the
microphone’s gain level.
1) Audio Settings:
„
HDMI Volume & Mute:
Set the volume level, or mute the audio, for
the HDMI and HDBaseT audio outputs.
Note: Not active when HDMI audio Out Bypass is enabled.
„
Analogue Volume & Mute:
Set the volume level, or mute the
audio, for the unamplified (5-pin terminal block) analogue audio
output.
Note: LPCM 2.0 sources only.
„
Speaker Gain & Mute:
Set the volume level, or mute the audio, for
the amplified (2x 2-pin terminal blocks) analogue audio output.
Note: LPCM 2.0 sources only.
„
MIC Gain:
Sets the microphone input’s volume level when the
microphone is an active audio source (mixed or unmixed).