
39
6.6.7 SYSTEM TAB
Click on the “System” tab to make changes to various system settings.
From this tab you can change the WebGUI login username and password
as well as configure the relay settings. Finally, this tab provides buttons to
reset the unit to factory defaults and to update the firmware.
1) Web User Setting:
This section allows for the login password to be
changed.
Note: The default user name and password is “admin”.
2) Network:
IP mode may be switched between Static IP or DHCP.
In Static IP mode the IP, netmask and gateway addresses may be
manually set. When in DHCP mode, the unit will attempt to connect
to a local DHCP server and obtain IP, netmask and gateway addresses
automatically. Please press “Save” after making any changes to the IP
configuration or mode.
Note: If the IP address is changed then the IP address required for WebGUI/
Telnet access will also change accordingly.
Summary of Contents for EL-8300VA
