Cynko
Met
N-200
Page 14
The presence and transport of people in the load crate of the spreader is
prohibited.
Before driving, make sure that the mini-spreader is correctly coupled to the
drawing vehicle (in particular, check that the ball is properly locked in the
hitch).
It is forbidden to park on the slopes with a loaded and unsecured machine.
Prior to each spreader's use, check its technical condition, especially in terms
of safety. In particular, check the technical condition of the hitching system
and driving system.
The spreader is adapted for driving on slopes up to a maximum inclination of 8°
. Moving
the spreader on steeper slopes may cause the spreader to tip over as a result
of loss of stability.
It is prohibited to exceed the admissible spreader load. Exceeding the
carrying capacity may lead to equipment damage, loss of stability while
driving, scattering of the load and cause a hazard to third parties during
driving.
The load on the spreader must be distributed evenly and cannot make it
difficult to drive the set or exceed the maximum tolerable pressing force on
the hitch of the drawing vehicle.
Take special caution when driving in reverse.
It is prohibited to reverse while the spreader's drive is running.
Re-loading of the mini-spreader increases the load on the rear axle of the
drawing unit and results in loss or deterioration of this vehicle's
maneuverability.
3.7
Description of residual risk.
Although the "CYNKOMET" Czarna Białostocka company takes
responsibility for the design and construction in order to eliminate the
danger, and has made every effort to eliminate the risk of an accident, some
elements of risk during operation of the spreader are unavoidable. The
