Cynko
Met
N-200
Page 37
4.
Technical Support
When using the spreader, constant monitoring of the technical condition
and the execution of maintenance procedures is required to keep the
machine in good technical condition. Therefore, the user of the spreader is
obliged to perform all maintenance and regulatory tasks specified by the
Manufacturer.
In order to function properly and to avoid serious failure of the spreader, it
must be kept in good technical condition, repaired on time and reasonably
exploited (operation within the technical parameters of the spreader). After
every use of the mini-spreader, clean the couplings of the driving axle. Failure
to do so may lead to jamming of the clutch.
An important part of exploitation is daily technical maintenance of the
spreader. Maintenance before starting work involves:
Control of tightening the screw connections and securing them against
unauthorized untightening (table 6).
Check the correct operation of control mechanisms.
Lubrication according to instructions.
Checking the tire pressure.
All detected faults are to be removed as soon as they are detected.
Prohibition on use of an unserviceable or incomplete machine.
