Cynko
Met
N-200
Page 11
vehicle, you must take special caution.
Exceeding the permissible load can cause accidents and damage to the
machine.
When cornering, you should take into account the inertia of the machine.
Before you start, check if the spreader has any loose parts.
Within additional elements which are force operated (e.g. by hand), there are
places of crushing and shearing.
Only remove disturbances in the spreader’s operation when the machine is at
a complete standstill.
The permissible transport speed 15 km / h cannot be exceeded.
It is forbidden to transport people or animals on the spreader.
It is forbidden to enter the cargo box while the machine is running.
Decoupling of the mini-spreader from the towing vehicle is prohibited while
the engine is running.
Modifications can be made only with the permission of the manufacturer. The
basic condition for safety are original spare parts and components. Using
other parts may result in exclusion of liability of the manufacturer for resulting
consequences.
Careless operation and use of the spreader can injure the operator or third
parties.
It is prohibited for persons not licensed to drive the mini-spreader's towing
vehicle to use the machine.
It is forbidden to use the spreader in non-compliance to its purposes. Prior to
every use of the spreader, check its technical condition, especially the
condition of the coupling system, drive system, and guards.
The machine is marked with information and warning inscriptions in the form
of stickers as specified in Table 1. The user is obliged to constantly take care
of the readability of signs and warning symbols on the machine. In the event
of damage or destruction replace them with new ones.
Labels with inscriptions and symbols are available from the manufacturer.
