CyberResearch MXGC Series User Manual Download Page 43

Page: 43 / 268

MXGC Series

CyberResearch

Motherboards

CyberResearch, Inc

25 Business Park Drive

P: (203) 483-8815; F: (203) 483-9024

Branford, CT USA

www.cyberresearch.com

Figure

Error! No text of specified style in document.

-8: SATA Connectors

2.5.10 Intel

ICH8DO USB Controller

Up to eight high-speed, full-speed or low-speed USB devices are supported by the

ICH8DO on the MXGC Series. High-speed USB 2.0, with data transfers of up to 480MB/s,

is enabled with the ICH8DO integrated Enhanced Host Controller Interface (EHCI)

compliant host controller. USB full-speed and low-speed signaling is supported by the

ICH8DO integrated Universal Host Controller Interface (UHCI) controllers.

Summary of Contents for MXGC Series


































































































































































































































































Search results

Summary of Contents for MXGC Series

Reviews:

Brands by name

Popular brands

CyberResearch MXGC Series, User Manual

Search results

Summary of Contents for MXGC Series

Reviews:

Brands by name

Popular brands