CyberResearch MXGC Series User Manual Download Page 146

Page: 146 / 268

CyberResearch

Motherboards

MXGC

Series

126

CyberResearch, Inc.

UDMA1

Ultra DMA mode 0 selected with a maximum data transfer

rate of 16.6MBps

UDMA1

Ultra DMA mode 1 selected with a maximum data transfer

rate of 25MBps

UDMA2

Ultra DMA mode 2 selected with a maximum data transfer

rate of 33.3MBps

UDMA3

Ultra DMA mode 3 selected with a maximum data transfer

rate of 44MBps (To use this mode, it is required that an

80-conductor ATA cable is used.)

UDMA4

Ultra DMA mode 4 selected with a maximum data transfer

rate of 66.6MBps (To use this mode, it is required that an

80-conductor ATA cable is used.)

UDMA5

Ultra DMA mode 5 selected with a maximum data transfer

rate of 99.9MBps (To use this mode, it is required that an

80-conductor ATA cable is used.)

S.M.A.R.T [Auto]

Use the

S.M.A.R.T

option to auto-detect, disable or enable Self-Monitoring Analysis and

Reporting Technology (SMART) on the drive on the specified channel.

S.M.A.R.T

predicts

impending drive failures. The

S.M.A.R.T

BIOS option enables or disables this function.

Auto D

EFAULT

BIOS auto detects HDD SMART support.

Disabled

Prevents BIOS from using the HDD SMART feature.

Enabled

Allows BIOS to use the HDD SMART feature

32Bit Data Transfer [Enabled]

Use the

32Bit Data Transfer

BIOS option to enables or disable 32-bit data transfers.

Summary of Contents for MXGC Series


































































































































































































































































Search results

Summary of Contents for MXGC Series

Reviews:

Brands by name

Popular brands

CyberResearch MXGC Series, User Manual

Search results

Summary of Contents for MXGC Series

Reviews:

Brands by name

Popular brands