CyberResearch MXGC Series, User Manual

Page: 125 / 268

MXGC Series
CyberResearch
®
Motherboards
CyberResearch, Inc . 105
25 Business Park Drive P: (203) 483-8815; F: (203) 483-9024
Branford, CT USA www.cyberresearch.com
To install these devices, connect the corresponding cable connector from the actual
device to the corresponding MXGC Series external peripheral interface connector making
sure the pins are properly aligned.
5.8.1 Audio Connection
Audio signals are interfaced through three phone jack connections. The red phone jack is
for Mic In, blue is for Line In and green is for Speaker Out. Follow the steps below to
connect audio devices to the MXGC Series.
Step 1: Locate the audio phone jacks . The location of the audio phone jacks are
shown in Chapter 3 .
Step 2: Insert audio phone jack plugs . Insert audio phone jack plugs into the audio
phone jacks on the external peripheral interface. See Figure Error! No text of
specified style in document. -59. Step 0:
Figure Error! No text of specified style in
document. -59: Audio Connectors
5.8.2 LAN Connection