CyberResearch MXGC Series Page 105 User Manual Download

Page: 105 / 268

MXGC Series

CyberResearch

Motherboards

CyberResearch, Inc

25 Business Park Drive

P: (203) 483-8815; F: (203) 483-9024

Branford, CT USA

www.cyberresearch.com

WARNING:

CPUs are expensive and sensitive components. When installing the

CPU please be careful not to damage it in anyway. Make sure the CPU

is installed properly and ensure the correct cooling kit is properly

installed.

The LGA775 socket is shown in Figure Error!

No text of specified style in

document.

-42.

Figure

Error! No text of specified style in document.

-42: Intel LGA775 Socket

To install a socket LGA775 CPU onto the MXGC Series, follow the steps below:

WARNING:

When handling the CPU, only hold it on the sides. DO NOT touch the

pins at the bottom of the CPU.

Step 1:

Remove the protective cover.

Remove the black protective cover by prying it

off the load plate. To remove the protective cover, locate the “

REMOVE

” sign

and use your fingernail to pry the protective cover off. See

Figure Error! No text

of specified style in document.

-43.

Summary of Contents for MXGC Series


































































































































































































































































Search results

Summary of Contents for MXGC Series

Reviews:

Related manuals for MXGC Series

Brands by name

Popular brands

CyberResearch MXGC Series, User Manual

Search results

Summary of Contents for MXGC Series

Reviews:

Related manuals for MXGC Series

Brands by name

Popular brands