CyberResearch MXGC Series, User Manual

Page: 126 / 268

CyberResearch
®
Motherboards MXGC Series
106 ©Copyright 2007 CyberResearch, Inc.
There are two external RJ-45 LAN connectors for PCIe GbE connection. The RJ-45
connectors enable connection to an external network. To connect a LAN cable with an
RJ-45 connector, please follow the instructions below.
Step 1: Locate the RJ-45 connectors . The locations of the USB connectors are shown
in Chapter 4 .
Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the MXGC Series. See Figure Error! No text of
specified style in document. -60.
Figure Error! No text of specified style in document. -60: LAN Connection
Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the onboard RJ-45 connector. Step 0:
5.8.3 Parallel Device Connection
A single female DB-25 connector on the external peripheral interface panel connects to
parallel communications devices. Follow the steps below to connect a parallel device.
Step 1: Locate the DB-25 connector . The location of the DB-25 connector is shown in
Chapter 3 .
Step 2: Insert the DB-25 connector . Insert the DB-25 connector of a parallel device
into the DB-25 connector on the external peripheral interface. See Figure Error!
No text of specified style in document. -61.