CyberResearch MXGC Series User Manual Download Page 157

Page: 157 / 268

MXGC Series

CyberResearch

Motherboards

CyberResearch, Inc

137

25 Business Park Drive

P: (203) 483-8815; F: (203) 483-9024

Branford, CT USA

www.cyberresearch.com

6.3.5 ACPI Configuration

The

ACPI Configuration

menu (

BIOS Menu 8

) configures the Advanced Configuration

and Power Interface (ACPI) and Power Management (APM) options.

BIOS Menu 8: ACPI Configuration

ACPI Aware O/S [Yes]

ACPI Aware O/S can only be configured the OS complies with the ACPI standard.

Windows 98, Windows 2000, and Windows XP all comply with ACPI.

Disables the ACPI support for the OS. This selection should

be disabled if the OS does not support ACPI

Yes

(Default)

Enables the ACPI support for the operating system. This

Summary of Contents for MXGC Series


































































































































































































































































Search results

Summary of Contents for MXGC Series

Reviews:

Brands by name

Popular brands

CyberResearch MXGC Series, User Manual

Search results

Summary of Contents for MXGC Series

Reviews:

Brands by name

Popular brands