CyberResearch MXGC Series, User Manual

Page: 113 / 268

MXGC Series
CyberResearch
®
Motherboards
CyberResearch, Inc . 93
25 Business Park Drive P: (203) 483-8815; F: (203) 483-9024
Branford, CT USA www.cyberresearch.com
RS-232/422/485 Serial Port Select JP3 3-pin header
Table Error! No text of specified style in document. -34: Jumpers
5.5.1 Clear CMOS Jumper
Jumper Label: JP2
Jumper Type: 2-pin header
Jumper Settings: See Table Error! No text of specified style in document. -35
Jumper Location: See Figure Error! No text of specified style in document. -50
If the MXGC Series fails to boot due to improper BIOS settings, the clear CMOS jumper
clears the CMOS data and resets the system BIOS information. To do this, use the jumper
cap to close pins 1 and 2 for a few seconds then remove the jumper cap and enable pins 1
and 2 to remain open.
If the “CMOS Settings Wrong” message is displayed during the boot up process, the fault
may be corrected by pressing the F1 to enter the CMOS Setup menu. Do one of the
following:
Enter the correct CMOS setting
Load Optimal Defaults
Load Failsafe Defaults.
After having done one of the above, save the changes and exit the CMOS Setup menu.
The clear CMOS jumper settings are shown in Table Error! No text of specified style in
document. -35.
Jumper Select Description
Open Keep CMOS Setup Default
Short Clear CMOS Setup