CyberResearch MXGC Series User Manual Download

Page: 196 / 268

CyberResearch

Motherboards

MXGC

Series

176

CyberResearch, Inc.

7.1 Available Software Drivers

NOTE:

The content of the CD may vary throughout the life cycle of the product

and is subject to change without prior notice. Visit the CyberResearch

website or contact technical support for the latest updates.

The following drivers can be installed on the system:

Intel® Chipset driver

VGA driver (Intel® Graphics Media Accelerator Driver)

Audio driver (Realtek HD Audio Driver (ALC883))

SATA driver (Intel® Matrix Storage Manager)

LAN Driver

Installation instructions are given below.

7.2 Driver CD Auto-run

All the drivers for the MXGC Series are on the CD that came with the system. To install the

drivers, please follow the steps below.

Step 1:

Insert the CD into a CD drive connected to the system.

NOTE:

If the system does not initiate the "autorun" program when the CD is

inserted, click the

Start

button, select

Run

, then type

X:\autorun.exe

(where

X:\

is the system CD drive) to access the CyberResearch Driver

CD main menu.

Step 2:

The driver main menu appears (Figure Error!

No text of specified style in

Summary of Contents for MXGC Series


































































































































































































































































Search results

Summary of Contents for MXGC Series

Reviews:

Related manuals for MXGC Series

Brands by name

Popular brands

CyberResearch MXGC Series, User Manual

Search results

Summary of Contents for MXGC Series

Reviews:

Related manuals for MXGC Series

Brands by name

Popular brands