User manual
CIP-ALL
CIP-ALL
- Page 4
In the ‘General’ menu: set an IP Address for the equipment. For example, the first unit is on the 192.168.1.0 network with the address .2 and
the second unit is on the 192.168.2.0 network with address .2
In the Analog Port Menu: set the analog interface parameters. For example, 2 wire mode and internal clock source for one unit, and Clock
Recovery mode for the other unit.
Set the clock source Bundle number as the slave clock reference; Bundle number 3 in this example.
In this case, the Clock Recovery is slaved to the Bundle number 3 clock source.
Click on the “Save” button to save this setting, and restart the product with the new parameters.
