User manual
CIP-ALL
CIP-ALL
- Page 24
5.3.5.
Bundles Configuration for E1
For E1 port, if you have configured the port in Unframed mode, you can configure the Bundle type in SAToP or AAL1 mode.
If you have configured the port in Framed or Multi-framed mode, you can configure the Bundle type in CES or AAL1 mode.
The General, PSN, VLAN and RTP parameters are the same than the Analog Port, see the previous Analog Chapter.
In
CES mode
you can choose the TimeSlot assignment, and the number of frames in the Payload :
In this example the time Slots 5 and 6 are chosen, and will be transmitted on the remote CIP via TDM.
In
SAToP mode
, all of the E1 frame is transmitted, and you can choose only the payload size in bytes:
5.3.6.
LAN port Configuration
This menu controls the operation of LAN ports 1 to 4 and the two optical ports 1 to 2.
Enable:
Activates or deactivates the LAN port.
Speed:
This parameter defines the port speed:
-
auto : automatic speed detection
-
10 MBPS
-
100 MBPS
The optical port speed is fixed 1 Giga.
Duplex:
This parameter defines the port mode:
