User manual
CIP-ALL
CIP-ALL
- Page 30
5.3.10. Administration / IP
Type :
-
static: static IP address.
IP Address:
Specify the IP address of the equipment.
Mask:
Specify the netmask according to the network IP address.
Gateway:
Specify the default gateway address (router) to reach the equipment from another network.
Leave this parameter to 0.0.0.0 if there is no such router on the network.
The following addresses are used to control the management functions of the product (http/https, ssh, ftp, snmp) and RS-232 terminal server.
Http server:
Enable or disable the HTTP protocol. Product configuration may not be changed if this protocol is disabled.
FTP server:
Enable or disable the FTP protocol. FTP is used for firmware update. The CIP-ALL is then a FTP server, it accepts connections from the
administrator. Firmware file are provided by CXR (*. Mki) and should be transferred as binary (bin) format with the “update.mki” file name (put
update.mki).
Telnetd:
Enable the telnet server for managing the equipment. This connection is not secured.
sshd :
Enable ssh protocol for managing the equipment with the command line interface.
