User manual
CIP-ALL
CIP-ALL
- Page 32
NTP Server:
Enter an IP address of a NTP server to update automatically the CIP-ALL system clocks.
A default gateway must be defined if this server is not in the same IP network.
Choose the Time Zone in the list.
When clicking the « Apply » button, settings are saved in non-volatile memory. It can be proposed to reset the CIP-ALL to reflect
these changes or they will be used after the next reboot of the CIP-ALL.
5.3.12.
Terminal server (Serial Port)
This menu defines the settings of the asynchronous serial port, and the ip parameters for transporting serial data over the network.
Port:
Port Name: 1. Only one terminal server port on the CIP-ALL.
Speed:
Asynchronous speed : 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps.
Format:
Character size (7 or 8 bits) / Parity / number of stop bits (1 or 2).
Flow Control:
-
None
: No flow Control.
-
Remote RTS DTR
: The RTS and DTR inputs will be transported on the remote CIP on the CTS DSR outputs. This option is only
available with RAW, Message, BLOC protocols.
