SK77981-14
204 | R-net Technical Manual | Chapter 11 – Warning Summary
Curtiss-Wright | PG Drives Technology
responsibility for losses of any kind if the programming of the control system is altered from the factory preset values.
Chapter 5 Section 3.17.
2.43
BASIC TESTS
WARNING:
These tests are a minimum recommendation only. It is the responsibility of the service person(s) to perform other tests
relevant to the original trip and wheelchair type.. Refer to the wheelchair’s Technical Manual for exact information of other
tests. Curtiss-Wright accept no liability for losses of any kind arising from the carrying out of the described tests, or from not
carrying out additional relevant tests.
These tests should be conducted in an open space and a restraining device such as a seat belt should always be used. Curtiss-
Wright accepts no liability for losses of any kind arising from failure to comply with this condition. Chapter 5 Section 4.
2.44
SERVICING OF DEFECTI VE UNITS
WARNING:
Any replacement work carried out without the wheelchair manufacturer’s permission will invalidate the control system’s
warranty.
Curtiss-Wright accept no liability for losses of any kind arising from unauthorized opening, adjustments or modifications to a
any component of the R-net control system. Chapter 5 Section 5.
2.45
INTRODUCTION
WARNING:
The Gyro cannot be used on moving vehicles, such as buses or trains. For this reason, t here should always be at least one
drive profile that does not have the Gyro control enabled so that the chair is always safe and stable to drive without Gyro.
Curtiss-Wright accepts no liability for losses of any kind arising from failure to comply with this condition. Chapter 7 Section
1.
