manualshive.com logo in svg

Curtiss-Wright R-NET, Technical Manual

The Curtiss-Wright R-NET Technical Manual is a comprehensive resource, designed to assist users in understanding and operating their R-NET product effortlessly. This manual, available for free download from our website, provides detailed instructions and insights, ensuring optimal performance and user satisfaction.

Share
Download
background image

 

 

Curtiss-Wright | PG Drives Technology 

SK77981-14

 

106 | R-net  Technical Manual | Chapter 3 – Programming   

If the  wheelchair is veering to the left, then the value should be increased. Conversely, if the wheelchair is veering to the right, 
then the value should be decreased.   

NOTE: 

This logic  may be affected by the setting of parameter, Motor Swap, which,  if set to Yes, will reverse the logic. 

 

12.8 

DISPLAY SPEED - (DISPLAY SPEED)   

This sets whether  the speedometer  is displayed in miles per hour or kilometers per hour. Note,  the Power Module always 
calculates and transmits speed information in miles per hour. 

The programmable options are Off, mph or km/h. 

If set to Off, there will be no speed or odometer  is displayed on the LCD screen.  

If set to mph, then the  speed and distance will be displayed as the value transmitted by the Power Module (which always sends 
the information in miles per hour) and the text ‘mph’  will appear on the LCD screen. 

If set to km/h,  then the module with the speed and odometer  display will convert the Power Module value into kilometers per 
hour and the text  ‘km/h’ will appear on the LCD screen.  

NOTE: 

Only certain Input Devices,  e.g. CJSM  or Omni, have the speedometer and Odometer functions.   

 

12.9 

DISPLAYS 

Displays defines the format of the  digital speed display. Displays can be programmed to Both, Speed  or Odometer.  If set to 
Both, the speed and trip distance are displayed on the screen. If set to  either Speed  or Odometer  only the  speed or trip distance 
will be displayed. 

12.10  MAXIMUM  RATED SPEED    

This calibrates the speedometer  and odometer  functions. The value chosen should correspond to the speed of the wheelcha ir 
that is expected at a setting of Maximum Forward Speed   = 100%. This value is always set in miles per hour.   

The programmable range is 0.0mph to 20.0mph. 

NOTE: 

Only certain Input Devices,  e.g. CJSM  or Omni, have the speedometer and odometer functions.  If the parameter is set to zero 
the Speed and Odometer display  will not be visible. 

 

12.11  MAXIMUM  DISPLA YED SPEED (MAX DISPLAY SPEED)     

This sets the operation of the graphical speed display, i.e. the blue semi -circle on the CJSM and Omni.  

Ordinarily, the powerchair will be dispatched so that the graphical speed display reaches its maximum point at the maximum 
rated speed of the powerchair. This means that, if the powerchair is later programmed to a lower speed, to sui t a particular user 

Summary of Contents for R-NET















































































































































































































Reviews:

No comments

Related manuals for R-NET

B+B triplex User Manual preview
triplex
Brand: B+B Pages: 71
Neatech LEVIA KID User Manual preview
LEVIA KID
Brand: Neatech Pages: 40
Neatech PROFESSIONAL REHAB Series Service Manual preview
PROFESSIONAL REHAB Series
Brand: Neatech Pages: 220
Neatech Job Walker Manual preview
Job Walker
Brand: Neatech Pages: 52
AAT Movilino Translation Of The Original User Manual preview
Movilino
Brand: AAT Pages: 37
Arjohuntleigh STEDY Instructions For Use Manual preview
STEDY
Brand: Arjohuntleigh Pages: 21
Roma Medical sirocco p110 User Manual preview
sirocco p110
Brand: Roma Medical Pages: 46
Golden BUZZ ABOUT GP164 Owner'S Manual preview
BUZZ ABOUT GP164
Brand: Golden Pages: 40
Jay Care Back Owner'S Manual preview
Care Back
Brand: Jay Pages: 5
Preston Ability BREEZE-C Maintenance Manual preview
BREEZE-C
Brand: Preston Ability Pages: 23
Quantum Rehab Dynamo 1107 Specifications preview
Dynamo 1107
Brand: Quantum Rehab Pages: 2
Alber E-Motion M25 Service Instructions Manual preview
E-Motion M25
Brand: Alber Pages: 9
Alber Adventure A10 Technical Documentation Manual preview
Adventure A10
Brand: Alber Pages: 48
Miracle Mobility Freedom Gold D20 Owner'S Manual preview
Freedom Gold D20
Brand: Miracle Mobility Pages: 36
Mobilita M606MG Care And Instructions Manual preview
M606MG
Brand: Mobilita Pages: 8
Mobilita Ibiza Premium Quick Start Manual preview
Ibiza Premium
Brand: Mobilita Pages: 8
FirstStreet Docking Station Mark II Owner'S Manual preview
Docking Station Mark II
Brand: FirstStreet Pages: 82
Comfort Company Body Point Shoulder Harness Manual preview
Body Point Shoulder Harness
Brand: Comfort Company Pages: 2

Brands by name

Popular brands

Load more brands