Curtis 1KUBZD1211PR, Installation & Owner'S Manual, Page: 14 / 30

CAB INSTALLATION
14 of 30
6.6 Install two p - clamps to the lower ROPS brackets
as shown to secure the larger A/C hose to the
ROPS bracket. Twist clamps and adjust hose
position so that hose does not contact sharp
edges of ROPS bracket.
Hardware Used Qty
1/4 - 20x1 ” Button Head Bolt 2
1/4 - 20 Flange Nut 2
3/4” P - Clamp 2
6.7 Secure both hoses to the vehicle frame using a
cable tie as shown. Ensure that the hoses will not
contact any sharp edges.
Hardware Used Qty
Cable Tie 1
Step 7: (Wiring)
7.1 Cut the cable ties securing the wiring harness and
attach the harness to the lower ROPS brackets
with p - clamps as shown.
Hardware Used Qty
1/4 - 20x1 ” Button Head Bolt 2
1/4 - 20 Flange Nut 2
3/4” P - Clamp 2
7.2 Secure the wire harness to the vehicle frame
using a cable tie as shown. Ensure that the
harness will not contact any sharp edges.
Hardware Used Qty
Cable Tie 1
Fig. 6.6 (P - Clamp Hoses to ROPS Bracket)
Fig. 6.7 (Cable Tie Hoses)
Fig. 7.1 (P - Clamp Wire Harness to ROPS Bracket)
P - Clamps
Cable
Tie
P - Clamps
Fig. 7.2 (Secure Wire Harness to Vehicle)
Cable
Tie