24
Expert-32P rev.11
Expert-32P
TEMPERATURE SET POINTS
The temperature set point is the target room temperature. It can be
adjusted between -40.0°F and 100°F (-40.0°C and 37.8°C). Note that
the temperature curve must be turned off to adjust this value. The
controller can operate with two set points if desired: a day set point and
a night set point (see User Setup to enable this feature). The user must
specify at what times the day and night set points come into effect.
Adjusting Temperature Set Points
Set the function to
SET POINT /
CURVE
using the menu select
buttons. The current day set point
is displayed, as well as the on/off
state of the temperature curve.
If the temperature curve is OFF, press the Edit key once. The day set
point flashes on the display. Use the arrow keys to adjust the set
point to the desired value.
If the temperature curve is ON, the temperature value displayed is
the set point as determined by the temperature curve. Press the Edit
key. The on/off state of the temperature curve starts flashing. Use
the arrow keys to turn the curve off. Press the Edit key twice. The
day set point flashes on the display. Use the arrow keys to adjust the
set point to the desired value.
Press the down-arrow key. The
current night set point is displayed.
Press the Edit key. The night set point flashes on the display. Use
the arrow keys to adjust the night set point to the desired value.
Press the down-arrow key. The
time at which the night set point
comes into effect is displayed.
75.0°F curveOFF
Night setpoint
75.0°F
Use night
setp at 12:00A
Summary of Contents for Expert-32P
