20
Expert-32P rev.11
Expert-32P
Relays 1-8
12t45678
Clock Mode:
Start-Stop
Press the Edit key and set the
timer mode to YES to configure
certain relays in timer mode for
cooling.
Press the down-arrow key to map
the relays. If timer mode is set to
YES, the user can choose between
ON, OFF and timer when selecting
a relay. When a relay is in timer
mode, the digit of the relay
alternates with the letter t.
Clock Mode on Clock Outputs
: The
user must choose between Start-Stop
and Start-Running Time for the clock
outputs. Press the Edit key and use the
arrow keys to configure each output.
Press the down-arrow key to map the
relays to the output (see above).
PROBE ASSIGNMENTS
Probes must be individually selected
for each heater. Use the arrow keys
to select a heater stage. The probes
assigned to the heater appear flashing
on the display. Press the Edit key and
use the arrow keys to enable or
disable each probe individually for the
heater.
Heater 8 Probes
123456
Use some relays
on timer? NO
Summary of Contents for Expert-32P
