Cumberland Expert-32P, User Manual

Page: 14 / 76

14
Expert-32P rev.11
Expert-32P
10. Use Static Pressure Sensor : Press
the Edit key and set to YES if a static
pressure sensor is connected to the unit.
11. Use Current Sensor : Press the Edit
key and set to YES if a current sensor is
connected to the unit.
12. Temperature Units : Press the Edit
key and choose between Fahrenheit and
Celsius degrees for displaying tempera-
ture values.
13. Humidity Compensation on Minimum
Ventilation : Press the Edit key and set
to YES to enable humidity compensation
on the minimum ventilation cycle.
14. Humidity Compensation on Cooling
Stages : Press the Edit key and set to
YES to enable humidity compensation on
cooling outputs.
15. Water Meter Units
: Press the Edit
key and choose between gallons and li-
ters for displaying water consumption.
16. Water Meter Calibration : Press the
Edit key and adjust the number of gal-
lons or liters per water meter pulse.
17. Number of Heaters and Fan Stages :
Press the Edit key to adjust the number
of heaters used. Press the Edit key once
again to adjust the number of fan stages.
18. Number of Cooling and Clock Outputs:
Press the Edit key to adjust the number
of cooling outputs used. Press the Edit
Use Static P
sensor? NO
Use Current
sensor? NO
Temperature
units: °F
RH influence on
min. vent.? NO
RH influence on
cooling? NO
Water meter
units: gallons
#Heaters: 6
#Fan stages: 10
Water meter
gal/pulse 1.00
#Cooling 2
#Clocks 2