Cumberland Evolution 1200 Series, Owner'S Manual

Page: 23 / 65

Part No. 4801-5331 Rev 2-2015 Evolution 1200 23 of 65
(1)MODULES (2)ENABLED (3)STATUS
EV-INPUT/OUTPUT Yes
OK
EV-16(1-16) or SCS-16 Yes OK
EV-16(17-32) or SCS-8 Yes OK
EV-16(33-48) No OK
EV-16(49-64) No OK
BACK-UP/S3 Yes OK
HEAT ZONE No OK
6.8 Network Status
The Network Status shows the installed Evolution Stages, the Back-Up and the Heat Zone. The ENABLED
indicator shows if the stage is enabled and the STATUS indicates OK or Failed.
(1) Modules – The Evolution modules that can be installed will appear here. EV I/O - This is the back
board of the Evolution 1200.
(2) Enabled – Those modules that are enabled will be indicated by Yes. This column lets you know which
modules are turned on for the Evolution control to communicate with. When adding expansion back-up
modules, the ENABLED must be set to “Yes” for proper operation.
(3) Status - OK or Failed. This column lets you know if you have lost communication with one of the
modules.
6.9 Program Set-Up
The Program Setup screen is used to select all of the Programming screens. Highlight an entry and press
the ENTER button. See the next section of this manual for a description of the programming screen.
(1) General Settings – Parameters that usually need to
be set when the system is installed. See Section 7.1 .
(2) Temperature Sensors – See Section 7.2 .
(3) Feed Level Sensors - See Section 7.3 .
(4) Ventilation Inlets - See Section 7.4 .
(5) Natural Ventilation - See Section 7.5 .
(6) Growout Curve - See Section 7.6 .
(7) Tunnel Ventilation - See Section 7.7 .
(8)-(11) On/Off Stages - Settings for Set up of stages.
See Section 7.8 .
(12) Variable Stage Outputs - Set-up for variable
stages. See Section 7.9 .
(13) Stage Properties – See Section 7.10 .
(14) Setup Feed Clocks – See Section 7.11 .
(15) Setup Light Clocks - This feature is added for
those applications that desire light control See
Section 7.12 .
(16) Seasonal Programs & Password Setup –
See Section 7.13 .
(17) Diagnostics - See Section 7.14 .
1. General Settings
 
2. Temperature Sensors

3. Feed Level Sensors

4. Ventilation Inlets

5. Natural Ventilation

6. Growout Curve

7. Tunnel Ventilation

8. On/Off Stages 1-16

9. On/Off Stages 17-32

10. On/Off Stages 33-48

11. On/Off Stages 49-64

12. Variable Stage Outputs

13. Stage Properties

14. Setup Feed Clocks

15. Setup Light Clocks

16. Seasonal Programs & Password Setup

17. Diagnostics
