CTC Union GSi 16, Installation And Maintenance Manual

Page: 95 / 120

95
CTC GSi 16
External heat source
Charge start ºC 70
Stop diff. 5
Smart block cap. Off
Save settings
Here your own settings can be stored; confirm with the
“OK” button.
Load settings
The saved settings can be reloaded using this option.
Load factory settings
The product is supplied with the factory values set. They
can be restored by activating this function. Press OK to
confirm. The language, product and product size are
retained.
12.14 External heat source
(EHS)
Charge start °C 70
This is the minimum temperature required in the external
heat source tank (B47) for the mixing valve to open and
emit heat to the system.
Stop diff (°C) 5
Temperature difference before charging stops from the
extra heating source.
Smart block cap. Off(On/Off)
Electric operation prioritised. The shunt on the EHS tank
is closed to accumulate heat energy.
Read more in the “Smartgrid” section.
12.15 EcoVent (accessory)
EcoVent
The menu becomes active once the CTC EcoVent
ventilation product has been defined. For information
on possible settings, please refer to the CTC EcoVent
manual.