CTC Union GSi 16, Installation And Maintenance Manual

Page: 73 / 120

73
CTC GSi 16
Operation solar panels
Status: Heating Charging EHS-tank
Solarpanel In/Out °C 65/70
EHS-tank ºC (B47) 55
EcoTank (B41)(B42) °C 72 / 50
X-volym (B41)(B42)°C 76 / 52
Pump solarpanel (G30) % 78
Pump heatexchanger (G32) % 88
Pump EHS (G46) On
Pump bedrock (G31) Off
Valve charging (Y31) Tank
Valve tank (Y30) EHS-tank
Power output kW 1.5
Energy output / 24 kWh 12.3
Energi kWh 712
12.4.6 Operation data, solar panels
This menu displays current temperatures and operating
data of solar collectors. The menu is only shown if solar
collectors are defined.
Status
The operating status of the solar controls is shown
here. The different operating modes that can be shown
are: heating, not heating, charging EHS-tank, charging
X-volume, charging bore hole, (charging bore hole),
cooling panel, cooling tank, pre-cooling tank, sensor
test and frost protect panel.
Solar panel In/Out °C
Shows the solar panel’s incoming and outgoing
temperatures.
EHS-tank (B47) °C
Shows the setpoint and current temperature in the
external heat source tank.
EcoTank (B41)(B42) °C
Shows EcoTank’s top temperature, the setpoint and the
tank’s bottom temperature.
X-volume (B41)(B42) °C
Shows the X-volume tank’s top temperature, the
setpoint and the tank’s bottom temperature.
Pump solar panel (G30) %
The speed of the solar panel’s charge pump is shown
here (or Off).
Pump heatexchanger (G32) %
If the intermediate heat exchanger is used, the speed of
the charge pump between the intermediate exchanger
and tank is shown here (or Off).
Pump charging (G46)
Whether the charge pump is in operation during transfer
is shown here.
Pump borehole charging (G31)
Whether the charge pump is in operation during bore
hole charging is shown here.
Valve charging (Y31)
Shows whether charging is to tank or borehole.
Valve tank (Y30)
When two tanks are being charged by solar power, the
position of the 3-way valve between the tanks is shown
here.