CTC Union GSi 16, Installation And Maintenance Manual

Page: 21 / 120

21 CTC GSi 16
Installation 5. Installation
This section is aimed at anyone responsible for one or more of the
installations required to ensure that the product works the way the property
owner wants.
Take your time going through functions and settings with the property owner
and answer any questions. Both you and the heat pump benefit from a user
who has completely understood how the system operates and should be
maintained.
5.1 Unpacking
Unpack the heat pump when it is placed next to its installation site. Check
that the product has not been damaged in transit. Report any transport
damage to the carrier. Also check that the delivery is complete according to
the list below.
Delivery includes:
• Heat pump CTC GSi 16
• Filler manifold brine
• Room sensor
• Housing Cover
• Outdoor sensor
• 2 x brine hoses
• Installation and Maintenance Manual
• Safetyvalve for heating system, 2.5 bar (3)
• Safety valve for cold side, 3 bar
• 2 x cable ties
• 2 x support sleeves
• 2 x compression ring couplings for the brine hoses.
• Brine level vessel
• Filter ball valve, magnetite for heating system return flow
• Dirt filter for cold tap water
• 2 x automatic bleeder valves (9)
• Pressure gauge (11)
• Manifold (8)
• Bushing 3/4"x3/8" (10)
• Bushing 1/2"x3/8" (12)
!
The product must
be transported and
stored in an upright
position.
!
As the cooling
module is
removable, there
must be a free
space of at least
one metre in front
of the product and it
must not be placed
below floor level
either.
9
10
8
3
9
12
11