CTC Union GSi 16, Installation And Maintenance Manual

Page: 110 / 120

110 CTC GSi 16
Dansk Nederlands Čeština
Eesti Polski Slovenščina
Svenska Norsk English
Deutsch Suomi Française
Factory settings coded
Code 0 0 0 0
DHW tank
Heating circuit
Compressor operation
Expansion valve
Log compressor stop
Cooling
Basic Settings
Settings language
Settings language
!
NB: Only an authorised service engineer is allowed to log into the Factory settings
coded option. Severe operational problems and faults may occur affecting the
product if values are amended without authorisation. Note that in such cases the
warranty terms do not apply.
12.20.3 Coded settings
This menu is intended to set the manufacturer’s
operational and alarm limits. A 4-digit code must be
specified to be able to amend these limits. However,
you can also take a look without any code to see what
options feature in the menu.
Coding in the case of a BBR (Boverkets Byggregler)
installation
On installation in a newly built dwelling, the regulations
of the Swedish National Board of Housing, Building and
Planning (Boverket) must be adhered to when setting
maximum power output. In such a case the installer
must enter the four figure code 8818, which will lock
the installed maximum power once the 8818 code is
changed to a different one.