85
CTC GSi 16
Economic
Normal X
Comfort
Setting DHW
Charge start %
No
Charge stop upper/lower ºC
55
Charge start lower ºC
40
DHW ºC
50
Reset program
Setting DHW Normal
12.8.1
DHW Program Settings
Options are
Economic, Normal and Comfort.
Press
OK to open the settings for the selected DHW
program.
Charge start %
No (No, 50 — 90)
Value
Charge start: 60% means that hot water charging is
allowed to start when the amount of hot water energy is at
60% or below.
No means that a low estimate of the amount of hot water
energy does not affect the start of hot water charging.
Charge stop upper/lower °C
55 ( 20 — 65)
Hot water charging is complete once both sensors reach
the set value.
Charge stop lower °C
40 ( 15 — 60)
Hot water charging starts when the temperature falls below
the set temperature.
DHW °C
50 ( 38 — 65)
The temperature of outgoing hot tap water.
Reset program
The current DHW program will be restored to factory
settings.
12.9 Communication
These settings are activated for the accessory’s superior
systems and are not used in normal operation. They are not
described in these instructions.
Summary of Contents for GSi 16
