CTC Union GSi 16, Installation And Maintenance Manual

Page: 80 / 120

80 CTC GSi 16
Dansk Nederlands Čeština
Eesti Polski Slovenščina
Svenska Norsk English
Deutsch Suomi Française
Heat pump
Settings language
Compressor: Permitted
Brine pump on
Auto
Tariff HP Off
Smart block HP Off
Start at degree minute -60
Max rps 100
Max rps silent mode 50
Timer Silent mode
Max rps silent mode 2
50
Timer Silent mode 2
Settings language
12.6 Heat pump
Compressor Permitted/Blocked
The product is supplied with a blocked compressor.
Since the compressor is blocked, the product operates
like an electric boiler with full functionality. Permitted
means that the compressor is allowed to operate.
Brine pump on Auto/10d/On
After installation, you can choose to run the brine pump
as follows:
• 10d: runs constantly for 10 days to remove air from
the system, after which the pump returns to auto
mode.
• Till: continuous brine pump operation.
•
Auto: the brine pump (G20) runs simultaneously
with the compressor.
Tariff HP Off(On/Off)
Find out more in the section titled “Define remote
control”.
Smart blocking HP Off(On/Off)
Read more in the “Smartgrid” section.
Start at degree minute -60 (-900—-30)
This states the degree minute at which the heat pump
will start.
Max. RPS 80 (50—80)
Sets the maximum permitted compressor speed.