Page | 17
TIME MODE
Press the MODE button repeatedly until you are in the time
mode (displayed by TIME).
In time mode, the day of the week and date are shown in the
top display segment, the hours and minutes in the middle
section and the seconds in the bottom section.
Press the SEL button to change the display at the top segment
from "day of the week and date" to "month and year". After 5
seconds - or when you press the SEL button - the display
returns to the "day of week and date" view again.
SET THE TIME
Keep the SET button pressed for approx. 3 seconds. Use the SEL button to
select between 12-hour and 24-hour (military) display.
Confirm your selection with the SEL button, the hours will flash.
Set the hours with the SEL button and confirm with the SET button, the
minutes will flash
Set the minutes with the SEL button and confirm with the SET button, the
seconds will flash
Press the SEL button to set the seconds to zero. Confirm with the SET button,
the year will flash
Set the year with the SEL button and confirm with the SET button. Set the
month and date in the same way. Now press the MODE button, all settings are
saved.
NOTE:
By pressing and holding the SEL button, you can fast-forward through the
values.
NOTE:
In order to correct any incorrect entries, start the relevant setting process
over again.