CSG Security NetVision Plus, User Manual

Page: 50 / 164

42
NetVision Plus/Elite and Micro DVR v2.3
SP2
User's Guide
21-0400E v2.3.3
Monitor:
Pertains to cameras connected
through a switcher. This is the camera ID/port
on the switcher (receiver-driver ID).
AutoFunct:
Allows selecting auxiliary
functions that were previously set up (if
available/supported).
AutoPan:
Sets the camera for automatic
panning (if available/supported).
AutoFocus:
This returns the focus control to
automatic (if available/supported).
Tip:
Selecting a pre-set position will also put the
camera into auto-focus mode.
AutoIris:
When pressed, the camera will
automatically adjust to changes in brightness
(if available/supported). When not pressed,
the manual brightness (iris) control is in effect.
Tip:
Selecting a pre-set position will also put the
camera into auto-iris mode.
Menu:
Activates the on-screen menu (for
cameras that support this).
Exception (Pelco-P):
For a Pelco-P camera, select
preposition 95 to enable the on-screen menu. To
navigate the menus, use pan up/down and iris
open/close.