CSG Security NetVision Plus, User Manual

Page: 112 / 164

104
NetVision Plus/Elite and Micro DVR v2.3
SP2
User's Guide
21-0400E v2.3.3
22.1
About the Remote Module
The remote module software allows viewing
one camera at a time, and provides access to
playback, chat, PTZ, and housekeeping
functions.
22.2
Starting the Remote Module
Tip: Check the Windows task bar to see if the remote
module software is already running.
From the Windows Start menu, select
Programs, NetVision , and
Remote Module .
Tip: With the remote module, you are not prompted
to log in until you try to connect to a Video Server to
use a feature that is set to check remote usernames
and passwords.
22.3
Using the Remote Module
To access a feature, select an item from the
remote station toolbar (details below). If
prompted to log in, enter a username and
password (that are registered at the specific
Video Server.)
[Browse]: This allows browsing for a Video Server
on your network.
(This is available only if you and the Video Server
are on the same network.)
(Enter your network login name and password if
prompted for this.)
------------------------------
When you end a session, you may be asked " Do
You want to Clean up All Passwords? ":
•
[Yes]: If the Video Server is set for remote
password protection, you'll have to enter your
remote user-name and password the next time
you log in.
•
[NO]: The Video Server will remember the last
password you entered.
22 Using the Small Remote Module