5.
INITIAL
START
UP
OF
YOUR
UNIT
11
5.5
Mineral or Salt Mix
The reason for this is because a higher salt reading is required for MINERALS to be as
conductive as SALT.
Pressing [+] or [-] will change it from SALT to MINERAL MIX.
MINERAL OR SALT MIX allows you to enter the type of mineral used in the pool.
Pressing [<] returns you to the previous menu screen.
Pressing [OK
our selection.
5.6 D
efault
D
isplay
S
creen
This should always remain at 100% unless SPA MODE has been selected.
reverse dir
The (●) s
ymbol indicat
The cell status shows as FWD when the cell is in the forward dir
The pump AC socket status is displayed, either ON or OFF.
Any power failures return you to the DDS screen and the last sav
e.
ed.
s with HH:MM in 24hr clock format.
ON or OFF).
DEFAULT DISPLA
Y SCREEN (DDS) displa
ys the screen to the right. This is the actual
Pressing [+] or [-] will incr
een will change as seen on the right.
The Mode shows AUTO and this can be changed by pressing Power/Mode (either AUTO,
The Water Temperature is diplayed.
T2 is the def
ying "Dual Timer Cycle" and T1 displays "Single Timer Cycle"
output % of the unit.
www.crystalas.com
65a010a5-6d71e2d3-6b3148b4-770d42ea
65a010a5-6d71e2d3-6b3148b4-770d42ea
