16
6. CONTROL PANEL OPERATION
6
.
6
SALT TEST
The LCD display then automatically returns to the DDS.
BEFORE ENTERING SALT TEST YOU MUST BE IN THE DDS SCREEN.
[ TDS TEST] button measures the salt level in your swimming pool. A reading will appear on the screen, allow at least
30 seconds for an accurate reading.
BEFORE PERFORMING A SALT TEST, ENSURE THE CELL IS CLEAR OF ANY CALCIUM DEPOSITS, AS THIS WILL
INSULATE THE ELECTRODES AND IMPACT YOUR READINGS. See 9.1 Inspecting and Cleaning the Cell Electrode
if manual cleaning is required.
The Salt level is tested and displayed as shown to the right.
Pressing [ TDS TEST] brings up the screen to the right for 6 seconds. This allows for the
The screen automatically then brings up the FWD direction TDS range for you to
record, as per the screen to the right for 5 seconds.
The screen automatically then brings up the CELL DISCHARGING which allows
testing of the TDS range.
the cell to loose its charge in the FWD direction, as per the screen to the right.
The screen to the right displays allowing for the testing of the TDS range.
The screen automatically then brings up the REV direction TDS range for you to record,
as per the screen to the right for 5 seconds.
Low salt levels (below 1000ppm) and high salt levels (above 8000ppm) ar
e and results may
become inaccurate. It may be that your cell needs replacing, contact your local pool Professional for a more accurate
result and further assistance.
The SALT TEST measurement is meant to be a guide only as many factors can impact the result. We recommend
you take your pool water sample to your local pool Professional before adding salt/minerals or replacing your Cell.
NEVER add more salt if not required. NEVER add salt directly in the skimmer box.
SALT TEST can also be entered by pressing the [OK] button in MAIN MENU and scrolling to SALT TEST.
www.crystalas.com
65a010a5-6d71e2d3-6b3148b4-770d42ea
65a010a5-6d71e2d3-6b3148b4-770d42ea
