35
11. Cruzbike Conversion Kit Instructions
These instructions are for people who purchased the Cruzbike Conversion Kit and who are going to
convert a regular mountain bike into a Cruzbike. If you purchased a complete bike, please disregard
this chapter.
Read the entire fitting instructions before starting.
Included Parts – Cruzbike Kit
Tick off the following parts, do any subassembly needed to prepare the items as pictured:
1. Telescoping Front Tube (TFT) Sleeve with Quick Release Clamp;
2. Chainstay with bushings inserted and three piece bolt.
3. Chainstay fixing bolt
4. 2 nylon washers, 1 steel washer x 2
5. Triangle brackets, Left and Right, with
6. Ring Clamps x 2;
7. Rubber Pads x 2;
8. Fork dropout bolt, 2 washers, one nut x 2
1. Rear axle to fit the
original front wheel
into the rear
dropouts
1
2
3
4
5
6
7
1
Parts Group A (triangle and FWD brackets)
Items A1 to A7
Parts Group B (front to rear axle)
Item B1
8
