background image

 16 

The reflector brackets may protect you from the brake straddle cable catching on the tire in 
the event of brake cable failure. If a brake straddle cable catches on the tire, it can cause the 
wheel to stop suddenly, causing you to loose control and fall. 

If you choose to ride under conditions of poor visibility, check and be sure you comply with all local 
laws about night riding, and take the following strongly recommended additional precautions:  

• Purchase and install battery or generator powered head and taillights that meet all regulatory 
requirements and provide adequate visibility. 

• Wear light colored, reflective clothing and accessories, such as a reflective vest, reflective arm and 
leg bands, reflective stripes on your helmet, flashing lights attached to your body and/or your bicycle 
... any reflective device or light source that moves will help you get the attention of approaching 
motorists, pedestrians and other traffic. 

• Make sure your clothing or anything you may be carrying on the bicycle does not obstruct a reflector 
or light. 

• Make sure that your bicycle is equipped with correctly positioned and securely mounted reflectors. 

While riding at dawn, at dusk or at night:  

• Ride slowly. 

• Avoid dark areas and areas of heavy or fast-moving traffic. 

• Avoid road hazards. 

• If possible, ride on familiar routes. 

If riding in traffic:  

• Be predictable. Ride so that drivers can see you and predict your movements. 

• Be alert. Ride defensively and expect the unexpected. 

• If you plan to ride in traffic often, ask your dealer or local bike shop about traffic safety classes or a 
good book on bicycle traffic safety. 

Extreme, stunt or competition riding 

Whether you call it 

Aggro, Hucking, Freeride, North Shore, Downhill, Jumping, Stunt Riding, Racing 

or something else: by engaging in this sort of extreme, aggressive riding you voluntarily assume an 
increased risk of injury or death. 

The Cruzbike is not designed for this type of riding, being intended for road and groomed trail touring, 
commuting, and recreational/fitness riding.  

When riding fast down hill, you can reach speeds seen on motorcycles, and therefore face similar 
hazards and risks. Have your bicycle and equipment carefully inspected by a qualified mechanic and 
be sure it is in perfect condition before descending steep hills. Use Caution and consult with expert 
riders and race officials on conditions and equipment advisable before riding at a new site. 

Wear appropriate safety gear, including an approved full-face helmet, full finger gloves, and body 
armor. Ultimately, it is your responsibility to have proper equipment and to be familiar with road or 
course conditions. 

WARNING

: Although many catalogs, advertisements and articles about bicycling depict 

riders engaged in extreme riding, this activity is extremely dangerous, increases your risk of 
injury or death, and increases the severity of any injury. Remember that professionals with 
many years of training and experience are performing the action depicted. 

Know your limits and always wear a helmet and other appropriate safety gear. Even with state-
of-the-art protective safety gear, you could be seriously injured or killed when jumping, stunt 
riding, and riding downhill at speed or in competition. 

Summary of Contents for Freerider











































Reviews: