16
English
Symbol
Meaning
Width across flat of the nut
to be unscrewed�
Read all safety regulations
and instructions�
Wear safety goggles�
Wear ear protectors�
Wear a dust mask.
Wear protective gloves�
Movement direction�
Rotation direction�
Locked.
Unlocked.
Attention. Important.
A sign certifying that the
product complies with es-
sential requirements of the
EU directives and harmo-
nized EU standards.
Useful information�
Do not dispose of the air
tool in a domestic waste
container�
Intended use of the air tool
The air tool is designed to tighten and unscrew thread-
ed fasteners (bolts, nuts, screws, wood screws, etc.).
Elements of the air tool
1
Tool holder
2
Additional handle *
3
Combination switch (reverse and torque)
4
Threaded plug
5
On / off switch
6
Inlet connector
7
Plug *
8
Oiler *
9
Quick-removable connector *
10
Allen key *
11
Socket wrench *
12
Extension rod *
13
Bolt for additional handle fastening *
14
Output hole
15
Oil-fill hole
* Optional extra
Not all of the accessories illustrated or described
are included as standard delivery
Installation / regulation
Before execution of any procedures, disconnect
air tool from compressor.
Do not draw up the fastening elements
too tight to avoid damaging the thread.
Mounting / dismounting / setting-up of
some elements is the same for all air
tools models, in this case specific mod
-
els are not indicated in the illustration.
Installing / removing the socket wrench (see fig. 1.1)
•
When mounting, install socket wrench
11
onto the
tool holder
1
, as shown in figure 1.1.
•
Disassembly operations do in reverse sequence.
Installing / removing the extension rod (see fig. 1.2)
[CT38113, CT38115]
•
When mounting, install extension rod
12
onto the
tool holder
1
, as shown in figure 1.2.
•
Disassembly operations do in reverse sequence.
Installing / removing the additional handle (see
fig. 2)
[CT38085, CT38116, CT38083, CT38084]
•
When mounting, install additional handle
2
and
screw in bolts
13
with the help of Allen key
10
, as
shown in figure 2.
•
Disassembly operations do in reverse sequence.
Connecting to the compressor (see fig. 3-4)
Note: make sure that the air pressure is
not less than that one specified in the
table "Air tool specification", otherwise
the air tool will work with less efficiency.
Summary of Contents for CT38083
