Crown Boiler Phantom X series, Installation And Operating Instructions Manual, Page: 23 / 136

23
IV. Venting
B. CPVC/PVC Venting (continued)
Table 11: CPVC/PVC Vent & Air Intake Components Included With Boiler
Vent & Air Intake Components
Quantity
Models PHNTM399C & PHNTM500C
Standard 4 in. Intake/4 in. Vent Kit
includes
Schedule 40 PVC Coupling 1
Schedule 40 PVC 90° Elbow 1
Stainless Steel Screen 2
30 in. Schedule 40 CPVC Pipe 1
Schedule 80 CPVC 90° Elbow 1
Vent Components
Quantity
PHNTM399C & PHNTM500C
Horizontal (Snorkel)
4 in. Intake/4 in. Vent
Schedule 40 PVC Pipe x up to 7 ft. (2.1 m) max. vertical run 2
Schedule 40 PVC 90° Elbow 4
Schedule 40 PVC Pipe x 6 in. (150 mm) min. horizontal run 2
Schedule 40 PVC Pipe x 9 in. (230 mm)min. horizontal run N/A
Table 12: CPVC/PVC Vent & Air Intake Components (Installer Provided) required for
Optional Horizontal Snorkel Termination
Table 13: Components Required for Optional Ipex Low Profile Sidewall Termination
Description Ipex Part Number Applicable to Boiler Sizes
3 in. Low Profile Termination Kit 196985
399 (reduced dia.)
500 (reduced dia.)
4 in. Low Profile termination Kit 196986
399 (standard dia.)
500 (standard dia.)
WARNING
Asphyxiation Hazard. Apply supplied dielectric grease to gasket inside vent section of vent connector.
Failure to apply the grease could result in flue gas leaks from gasket rupture during vent pipe installation or
gasket deterioration due to condensate exposure.
Table 14: CPVC/PVC Vent & Air Intake Components (Installer Provided) required for
Optional Vertical Roof Termination
Vent Components
Quantity
PHNTM399C & PHNTM500C
Vertical (Roof) Termination,
4 in. Intake/4 in. Vent
Schedule 40 PVC Coupler 1
Schedule 40 PVC 90° Elbow 2
Schedule 40 CPVC Pipe x 6 in. (150 mm) min. horizontal
run
1