Page 28
RADIO PENDANT OPTIONS “A”
RADIO PENDANT OPTIONS “A”
-
P151E-P158E
This block of addresses (P151E - P158E) are used to select the
operational settings for each of the 8 radio pendants. Functions
such as arm only, disarm only or both can be selected for each
pendant independently.
P151E-Pendant #1 Options 1E
Assigned to Partition “A” - Default
on
2E
Assigned to Partition “B” - Default off
3E
Pendant can Arm the system - Default
on
4E
Pendant can Disarm the system - Default
on
5E
Pendant can turn Stay Mode On - Default off
6E
Pendant can turn Stay Mode Off - Default off
7E
Spare - Default off
8E
Pendant is disabled if panel is in alarm - Default off
Option 1
Assigned to Partition “A”
- This option assigns the pendant to partition “A”. The pendant must be
assigned to at least one partition to allow it to perform arm/disarm functions. The pendant can be
assigned to both partitions if required.
Option 2
Assigned to Partition “B”
- This option assigns the pendant to partition “B”. The pendant must be
assigned to at least one partition to allow it to perform arm/disarm functions. The pendant can be
assigned to both partitions if required.
Option 3
Pendant can Arm
- This option assigns the Arm function to a pendant. The partition/s it will arm has to
be selected at options 1 & 2.
Option 4
Pendant can Disarm
- This option assigns the Disarm function to a pendant. The partition/s it will
disarm has to be selected at options 1 & 2.
Option 5
Pendant can turn Stay Mode On -
This option assigns the Stay Mode Arm function to a pendant. The
partition/s it will arm has to be selected at options 1 & 2. If Stay Mode arming is to be used for this
pendant then Options 2 & 3 should be turned off.
Option 6
Pendant can turn Stay Mode Off -
This option assigns the Stay Mode Disarm function to a pendant.
The partition/s it will disarm has to be selected at options 1 & 2. If Stay Mode disarming is to be used for
this pendant then Options 2 & 3 should be turned off.
Option 7
Spare
Option 8
Pendant Disabled if panel is in Alarm -
This option stops the pendant from working while the panel is
in alarm. This feature should only be set if you feel that a pendant with disarming functions could be
prone to misuse in an alarm condition.
Note: P152E through P158E are as above but applied to pendants 2-8
RADIO PENDANT OPTIONS “B”
RADIO PENDANT OPTIONS “B”
-
P161E-P168E
This block of addresses (P161E - P168E) are used to select output
control and Panic options for each of the 8 radio pendants.
To prevent confusion, if a pendant is set to control an output or
provide instant Panic, then you should turn off any Arm or Disarm
options at addresses P151E-P158E.
P161E-Pendant #1 Options 1E
Turn output ON - Default off
2E
Turn output OFF - Default off
3E
spare
1 - 3 4 - - - -
Pendant 1 Opt A
Pendant 1 Opt B
- - - - - - - -
