manualshive.com logo in svg

Crow Arrowhead Elite V6, Installation & Programming Manual

The Crow Arrowhead Elite V6 offers top-notch security with its advanced technology. Unlock the full potential of this exceptional product by accessing the Installation & Programming Manual. Download this comprehensive manual for free from our website and ensure seamless setup and operation for optimal safety and protection.

Share
Download
background image

Page 38 

               4E = Radio user #1 will arm 
               5E = Radio user #1 will disarm 
               6E = Radio user #1 can Arm Stay Mode on 
               7E = Radio user #1 can Disarm Stay Mode off 
               8E = Radio user #1 is disabled during alarm state 

 

Option 1            Radio user #1 is assigned to Area "A"

 - The functions set by options 4-7 will be active in Area "A" 

 
Option 2            Radio user #1 is assigned to Area "B"

 - The functions set by options 4-7 will be active in Area "B" 

 
Option 3            Radio user #1 is assigned to Area "C"

 - The functions set by options 4-7 will be active in Area "C" 

 
Option 4            Radio  user  #1  will  arm

 - When this option is enabled, radio user #1 will arm whichever area is 

                          assigned by options 1-3 

 
Option 5            Radio  user  #1  will  disarm

 - When this option is enabled, radio user #1 will disarm whichever area 

is assigned by options 1-3 

 
Option 6            Radio  user  #1  can  Arm  Stay  Mode

 - When this option is enabled, radio user #1 will turn Stay 

                          Mode on in whichever area is assigned by options 1-3 

 
Option 7            Radio  user  #1  can  Disarm  Stay  Mode

 - When this option is enabled, radio user #1 will turn Stay 

                          Mode off in whichever area is assigned by options 1-3 

 
Option 8            Radio user #1 is disabled during alarm state

 - When this option is enabled, radio user #1 can   

                          not be used to reset an alarm, i.e. it must be reset at the keypad.

 

 
Where P661E sets options for radio user #1, P662 sets options for radio user #2 etc 
 
P661E     Radio user #1 options                                         P671E  Radio user #11 options 
P662E     Radio user #2 options                                         P672E  Radio user #12 options 
P663E     Radio user #3 options                                         P673E  Radio user #13 options 
P664E     Radio user #4 options                                         P674E  Radio user #14 options 
P665E     Radio user #5 options                                         P675E  Radio user #15 options 
P666E     Radio user #6 options                                         P676E  Radio user #16 options 
P667E     Radio user #7 options                                         P677E  Radio user #17 options 
P668E     Radio user #8 options                                         P678E  Radio user #18 options

 

P669E     Radio user #9 options                                         P679E  Radio user #19 options 
P670E     Radio user #10 options                                       P680E  Radio user #20 options

 

 

ASSIGNING OUTPUT & PANIC OPTIONS TO RADIO KEYS

 - 

P681E - P700E

 

 
P681E     1E

 = 

Radio user #1 turns control function on 

               2E = Radio user #1 turns control function off (Toggles if 1 on) 
               3E = Radio user #1 turns output on 
               4E = Radio user #1 turns output off (Toggles if 3 ON) 
               5E = Radio user #1 is instant panic 
               6E = Radio user #1 is delayed panic (1.5 sec) 
               7E = Spare 
               8E = Spare 

 

Option 1                 Radio user #1 turns control function on

 - When this option is enabled, the radio user will turn 

on the Control Function as if it were operated from the keypad. 

 
Option 2                 Radio user #1 turns control function off

 - When this option is enabled, the radio user will turn  

the control output off as if it were operated from the keypad.  (Dependant on control options) 

 
Option 3                 Radio  user  #1  turns  output  on

 - When this option is enabled, the radio user will turn on the 

output as assigned by P581E. 

 
Option 4                 Radio  user  #1  turns  output  off

 - When this option is enabled, the radio user will turn off the 

output as assigned by P581E. This function is only valid when there is no reset time assigned to 
the output in question. 

 

Summary of Contents for Arrowhead Elite V6





















































































Reviews:

No comments

Related manuals for Arrowhead Elite V6

2VV AirGENIO SUPERIOR Manual preview
AirGENIO SUPERIOR
Brand: 2VV Pages: 27
CALEFFI 145 Series Installation And Commissioning Manual preview
145 Series
Brand: CALEFFI Pages: 12
CALEFFI QuickSetter+ 132 Series User Manual preview
QuickSetter+ 132 Series
Brand: CALEFFI Pages: 5
GCE S 400 Operating Instructions Manual preview
S 400
Brand: GCE Pages: 24
Lawler 805 Installation & Maintenance Manual preview
805
Brand: Lawler Pages: 5
Madas M16/RMO NA/NC Installation Instructions Manual preview
M16/RMO NA/NC
Brand: Madas Pages: 6
Madas EVP/NC Manual preview
EVP/NC
Brand: Madas Pages: 11
Keba Kemro K2 Project Engineering Manual preview
Kemro K2
Brand: Keba Pages: 16
KEB COMBIVERT F5 Safety Manual preview
COMBIVERT F5
Brand: KEB Pages: 16
IN-COMMAND NCSP35CM Installation And Operation Manual preview
NCSP35CM
Brand: IN-COMMAND Pages: 47
SYCLOPE TRACE'O Manual preview
TRACE'O
Brand: SYCLOPE Pages: 60
SAGEMCOM DIW377 ALT US Manual preview
DIW377 ALT US
Brand: SAGEMCOM Pages: 2
Instant Care IC2020TX Manual preview
IC2020TX
Brand: Instant Care Pages: 2
Rollei Soluna Remote Control Instruction Manual preview
Soluna Remote Control
Brand: Rollei Pages: 8
TSM DOUBLER2 Instructions For Installing preview
DOUBLER2
Brand: TSM Pages: 2
ICP DAS USA ALM-04-MRTU User Manual preview
ALM-04-MRTU
Brand: ICP DAS USA Pages: 26
National Instruments cRIO-FRC II User Manual And Specifications preview
cRIO-FRC II
Brand: National Instruments Pages: 22
Pangolin FB4 Series User Manual preview
FB4 Series
Brand: Pangolin Pages: 35

Brands by name

Popular brands

Load more brands