![background image](http://html.mh-extra.com/html/critter-and-guitari/organelle-m/organelle-m_user-manual_2686197005.webp)
back of the unit (don't worry; the port labels will be upright from this vantage). Set the
speaker switch to the sounding position. This will route all sound output to the onboard
speaker. Additionally, the leftmost 1/8" jack is for headphones, and the next 1/4" jack is
stereo line out.
3.
Load a patch.
Immediately to the left of the volume knob is the
Selector
encoder. Turn this encoder to
select one of the listed patches, and then press down the top of the encoder to load the
patch. Pick something from the Synthesizer category to start.
4.
Play!
Play the keys, adjust some parameters (via the four knobs on the left), and enjoy!
And if you want to try a di
ff
erent patch, simply turn the Selector encoder and select
another patch.
5.
When you have had enough fun for now, shut down the Organelle.
This is achieved
simply by moving the
Power
switch on the rear panel to the
OFF
position. If the
included power supply is powering the Organelle, do not disconnect the cable until the
OLED screen clears.
1. Organelle Concepts
Again, welcome to the world of the Organelle! As this instrument can work for people in
many di
ff
erent ways and at multiple depths of operation, let us begin by getting a few
ideas straight, starting with the most obvious question...
1.1 What is this thing?