Critter & Guitari Organelle M User Manual Download | Manualshive

Page: 3 / 53

background image

First edition by Dave Linnenbank - October 2015

Updated for Organelle M - 2020

OS version 4.0

WAIT AM I IN THE RIGHT PLACE?

Before we get started, please note that this manual is for the Organelle M, with a built-in
speaker and battery power. Visit this page if you are looking for the manual for the original
Organelle.

This manual is for OS version 4.0. You can check your OS version number from the Info
menu item in the SYSTEM menu. If your hardware unit is running a version earlier than
v4.0, see Chapter 7 for information on updating your Organelle OS.

IMPORTANT NOTE

The Organelle M has a powerful built in speaker. It is possible for a patch to make some
very loud and startling sounds. Any patch that feeds audio from the input to the audio
output, such as an e

ff

ect processor, has the potential to feedback if the speaker is

enabled and the internal mic selected. For this reason it is

strongly recommended

to

switch the input select switch to the line-in position when you start a patch for the first
time.

It is also possible for an incorrectly configured patch to output very loud sounds from the

«
1
2
3
4
5
...
»

Summary of Contents for Organelle M






















































Reviews:

No comments

Related manuals for Organelle M

Brand: Wavetek Pages: 43

Brand: Charlie Lab Pages: 5

Brand: Patching Panda Pages: 4

Brand: Abstract Data Pages: 5

Brand: Roland Pages: 196

Brand: Audya Pages: 18

Brand: Yamaha Pages: 48

MOD-MOTHER-32-01

Brand: Moog Pages: 13

Brand: Moog Pages: 12

Brand: Moog Pages: 20

minimoog Voyager

Brand: Moog Pages: 51

MINIMOOG MODEL D

Brand: Moog Pages: 84

Brand: Ekssperimental Sounds Pages: 12

Brand: CHD Elektroservis Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands